Request Sample

Products

Products

WhatsApp

+86 18626059817

Email

cora@wxqysteel.com

Address

Shandong Province

Hexamethylene Diisocyanate CAS#822-06-0

  • Hexamethylene Diisocyanate CAS#822-06-0
  • Hexamethylene Diisocyanate CAS#822-06-0
  • Hexamethylene Diisocyanate CAS#822-06-0
  • Hexamethylene Diisocyanate CAS#822-06-0
  • Hexamethylene Diisocyanate CAS#822-06-0

Hexamethylene Diisocyanate CAS#822-06-0

High Reactivity for Chemical Synthesis: Hexamethylene diisocyanate (HDI) reacts slowly with water, making it suitable for controlled chemical reactions in polymer and coating applications.


Stable Liquid Form: Exists as a colorless or slightly yellow liquid at room temperature, facilitating handling and storage.


Wide Thermal Range: With a melting point of −67 to −55°C and a boiling point of 255–261°C, HDI is stable over a broad temperature range.


Low Solubility in Water: Slight water solubility allows it to maintain performance in formulations where minimal hydrolysis is desired.




Phone ：+86 18626059817
WhatsApp ：+86 18626059817
Email ：cora@wxqysteel.com
product description

Products Description of Hexamethylene Diisocyanate CAS#822-06-0

Hexamethylene diisocyanate is a colorless to slightly yellow liquid with a pungent odor. It is slightly soluble in water and reacts slowly upon contact. The compound has a relative density of approximately 1.05 at room temperature, a boiling point of 255–261°C, and a melting (freezing) point of −67 to −55°C. The saturated vapor concentrations are 46 mg/m³ at 20°C and 137 mg/m³ at 30°C.

Product Application of Hexamethylene Diisocyanate CAS#822-06-0

Hexamethylene diisocyanate is widely used as a pharmaceutical intermediate and in the production of carbonyl compounds, isocyanates, and other organic chemical raw materials. It serves as a key building block for organic synthesis, fine chemicals, esters, and nitrogen-containing compounds. Additionally, it is utilized in polymer science, material intermediates, monomers, and various chemical reagents and standard products for research and industrial applications.


Product Information

Parameters

Melting point-55°C
Boiling point82-85 °C/0.1 mmHg
density1.047 g/mL at 20 °C (lit.) 1.047 g/mL at 20 °C
vapor pressure0.05 mm Hg ( 25 °C)
refractive indexn20/D 1.453
Fp248 °F
storage temp.Store below +30°C.
formLiquid
Specific Gravity1.05
colorClear colorless to slightly yellow
explosive limit0.9-9.5%(V)
Water SolubilityReacts
SensitiveMoisture Sensitive
BRN956709
Exposure limitsTLV-TWA 0.0343 mg/m3 (0.005 ppm) (ACGIH).
Stability:Stable. Moisture sensitive. Combustible. Incompatible with strong oxidizing agents, strong bases, amines, acids. May react explosively with alcohols in the presence of base without a diluting solvent. Heating above 200 C may cause polymerization.
InChIKeyRRAMGCGOFNQTLD-UHFFFAOYSA-N
LogP3.2 at 20℃
CAS DataBase Reference822-06-0(CAS DataBase Reference)
NIST Chemistry Reference1,6-Hexamethylene diisocyanate(822-06-0)
EPA Substance Registry SystemHexamethylene-1,6-diisocyanate (822-06-0)
Hazard CodesT,T+,F
Risk Statements23-36/37/38-42/43-41-34-26-22-39/23/24/25-23/24/25-11
Safety Statements26-28-38-45-28A-36/37/39-23-36/37-16-7
OEBD
OELTWA: 0.005 ppm (0.035 mg/m3), Ceiling: 0.020 ppm (0.140 mg/m3) [10-minute]
RIDADRUN 2281 6.1/PG 2
WGK Germany1
RTECSMO1740000
F10-19-21
Autoignition Temperature454 °C
TSCAYes
HazardClass6.1
PackingGroupII
HS Code29291090
Hazardous Substances Data822-06-0(Hazardous Substances Data)
ToxicityLD50 orally in Rabbit: 746 mg/kg LD50 dermal Rabbit 570 mg/kg


Factory Showcase
拼图_美图设计室-(1)
Quality Control Lab
未标题-2
Shipping And Transportation
拼图_美图设计室
FAQ
Q：

Are you a manufacturer or a trader?

A：
We are a supply chain service provider rather than a single manufacturer. Instead of being tied to one specific factory, we have established deep partnerships with numerous high-quality domestic chemical enterprises that hold certifications such as ISO and REACH. This allows us to flexibly match the most suitable supply sources to your needs while independently conducting third-party quality inspections to ensure delivery quality and price competitiveness.
Q：

How do your overseas warehouses operate, and what are the practical benefits?

A：
We maintain transit warehouses with standing inventory in Southeast Asia, the Middle East, and Eastern Europe.
For you: You can pick up goods directly from local warehouses without the need for full-container orders; delivery times are reduced from the standard 30–45 days to just 3–5 days.
Reduced inventory pressure: You can purchase small batches for trial and quality verification before scaling up orders, avoiding the need to tie up large amounts of capital upfront.
Emergency restocking: If your production line faces a sudden material shortage, we can urgently dispatch supplies from our regional warehouses to prevent production downtime.
Q：

What is the Minimum Order Quantity (MOQ)?

A：
For standard products, the MOQ is typically one 20-foot container (approx. 16–20 tons) for direct shipments from China. However, for stock picked up from overseas warehouses, we support orders starting from 1 ton—ideal for sample testing or small-batch production. Specific MOQs depend on the product category and packaging type; please contact us for details.
Q：

How do you ensure product quality?

A：
We implement a "three-level quality control" system:
Before leaving the factory: We require the factory to provide a Certificate of Analysis (COA) for the specific batch.
Before shipment: We commission international third-party agencies like SGS or Intertek to conduct random inspections, with costs covered by us (for long-term partners).
After arrival: If quality issues arise, we commit to unconditional negotiation regarding returns, exchanges, or compensation, and we assume full responsibility. All terms are stipulated in the contract.
Q：

What payment methods do you accept? Do you offer credit terms?

A：
We accept T/T (Telegraphic Transfer), L/C (Letter of Credit at sight or usance), and D/P (Documents against Payment). For clients with a long-standing partnership and good credit standing, we offer partial credit terms (e.g., 30–60 days), subject to negotiation based on transaction history and due diligence results. Cash on Delivery (COD) is available for local customers ordering in-stock items from our overseas warehouses.
Q：

What is the typical delivery lead time?

A：
FOB (China Port): Goods are prepared and shipped within 7–15 working days after the contract is signed and the prepayment is received.
Overseas Warehouse Stock: Items are dispatched within 1–3 working days of order confirmation and payment; local delivery typically takes 2–5 days (depending on the country).
Q：

Which trade terms do you offer? Do you support DDP (Delivered Duty Paid)?

A：
We are proficient in handling common terms such as FOB, CIF, CFR, and EXW. Additionally, for regions covered by our overseas warehouses, we offer DDP services (including duties and door-to-door delivery), allowing you to receive goods without the hassle of complex import customs clearance procedures. Please consult your sales manager for specific costs.
Q：

How can I obtain samples? What are the costs?

A：
If stock is available at an overseas warehouse, we can provide 1–2 kg of samples for free; you only need to cover the local courier fees.
If shipping from China, we can arrange delivery via DHL or FedEx; samples are free, but you bear the international shipping costs. Once a clear intent to cooperate is established, these shipping costs can be deducted from your first order.
Q：

Can the contract price be adjusted if product prices fluctuate?

A：
We offer a price protection mechanism:
For fixed-price contracts, we do not unilaterally raise prices due to market increases.
If you anticipate a market downturn, we can negotiate floating pricing—settling based on a benchmark price on the date of shipment or arrival—to flexibly manage fluctuations.
Q：

What does your after-sales service include?

A：
We provide full-lifecycle service:
Usage Guidance: Assistance with adjusting processing parameters (if required).
Complaint Handling: Response within 48 hours and a solution provided within 7 days.
Regular follow-ups: Proactive contact every six months to understand changing needs and optimize supply solutions.
Contact Us
Submit
Recommendation
Inquiry